Find Directional Control Valve Function, Hydraulic Pump Case Drain Flow, Aircraft Auxiliary Power Unit on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Manual Hospital Bed > MINI POWER UNIT FOR MEDICAL FACILITY

MINI POWER UNIT FOR MEDICAL FACILITY

MINI POWER UNIT FOR MEDICAL FACILITY

Product Description


This hydraulic power unit is specially designed for electric operating bed in Medical Equipment, with low noise,low current and light weightjt provides hydraulic power source for the operation bed,And it is also suitable for Hospital Bed



dsx9 dsx10


Model Specifications

Type 型号 Motor 电机

Pump Displacemen

t 泵排量(cc/r)

Tank Capacit

y 油箱容积(L)

Pressure

压力 (MPa)

Mounting

安装方式

Oil Port

油口尺寸

H PU1-02BAABH H ADAA

24V 0.5Kw 2000rpm

0.25 1.0 10



卧式

Horizontal



G1/4"(可定制ORCUSTOMIZE

HPU1-02BAACHHACAA

0.5

6.5



Special Notes



1、 For different flow rate pump, pressure and motor power, please check the ordering guidance.

2、 This motor is based on gap working system S2=2 ~ 4min(continuous working time), so it cannot run continuously.

3、 Before installation, the cylinder, oil pipe, joint and other hydraulic components must be cleaned and free from any impurities.

4、 The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HM46 hydraulic oil is recommended.

5、 If you need manual oil discharge device for emergency , please specify when ordering.

6、 Check that whether there is enough oil in the oil tank immediately after the first operating of the system.

7、 The hydraulic oil should be replaced after the first 100 hours' use of the system, and change the oil every 3,000 hours after that.




CHANGZHOU ROHN HYDRAULIC SCI-TECH CO.,LTD

 

We are devoted to hydraulic power unit for 10 years, In addition, we also produce various circuit block, hydraulic accessories as well as provide professional services for the customers.We accept customized. The company was found in May 2011, it's located in Yongxin Road No58 Panjia Xueyan Town Wujin District Changzhou Jiangsu Province China. We are devoted to self

Company Info

  • Company Name: CHANGZHOU ROHN HYDRAULIC SCI-TECH CO.,LTD
  • Representative: LVJUN
  • Product/Service: Hydraulic Power Unit , Hydraulic Pump Unit , Hydraulic Power Station , Power Unit , Hydraulic Poppet Valve , Hydraulic Pilot Valve
  • Capital (Million US $): 200万元整
  • Year Established: 2016
  • Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
  • Export Percentage: 11% - 20%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 20
  • No. of R&D Staff: Fewer than 5 People
  • No. of QC Staff: 21 -30 People
  • Factory Size (Sq.meters): Below 1,000 square meters
  • Factory Location: No.13, Kuanda Road, Xueyan Town, Wujin District, Changzhou city
  • Contact Person: Mr. songwei
  • Tel: 86-519-86056606
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters